Ribimex RIBILAND PRMPC163 Betriebs- Und Wartungshandbuch Seite 28

4.5- Starting the engine
1. Open Fuel Valve lever to "ON" position
3. Completely close the Choke Lever
5. Operate the starter grip.
Pull the starter grip rope lightly until you feel a
resistance, then pull briskly until engine starts.
Return the starter rope gently.
Repeat operation if necessary, and until engine
starts.
Tips: Do not pull starter grip rope over its full
length. Return starter rope gently so as not to
damage the recoil starter.
Fig.9
Fig.11
Fig.13
2. Open Throttle Lever to "slow"
4. Turn the Engine Switch to "ON" position
6. Open the Choke Lever
7. Gradually open the Throttle lever [Fast]
- 25 -
Fig.10
Fig.12
Fig.14
Fig.15