Varde IN-line 47 Einbauanleitung Seite 18

Fitting
5 Positioning
You can now fit the fireplace insert.
| Remove the vermiculite plates and the base slab from the insert in the
order shown.
| Push the insert into position in the fireplace.
6 Connecting
The fireplace insert can now be connected to the flue.
| Pull the flue in through the rear opening in the fireplace insert.
| Fasten the tubing in the fireplace insert by folding up the flaps, so
that the tubing is held firmly in place.
18
|
2
3
4
1