Convenience Functions; Adjusting The Volume - Grundig TVR 3735 FR/TOP Servicehandbuch

CONVENIENCE FUNCTIONS

Convenience functions with the
»SPECIAL FUNCTIONS« menu
1
Call up the »DIALOG CENTER« by pressing »
DIALOG CENTER
SHOWVIEW
2 From the »DIALOG CENTER«, select the » SPECIAL FUNCTION« line with
TIMER
LANGUAGE SELECTION , .
», « or ». « and confirm with »OK«.
SPECIAL FUNCTION
INSTALLATION
CLOCK
Note:
OK TXT
Further operation is explained in the following sections.
Concealing or displaying screen displays
1
In the » SPECIAL FUNCTION« menu, select the » OSD-Funktion« line with
», , « or ». . «.
SPECIAL FUNCTIONS
2 Select function with » E E
Osd function Off
Tape speed SP
»Off«: no display;
Volume limiter Off
Factory preset
»Counter«: tape length is continuously displayed;
Service
»Auto.«: displays are shown for approximately three seconds.
TXT
3 Quit setting with the » TXT« button.

Adjusting the volume

The volume level of normal television programs may differ from that of ad-
SPECIAL FUNCTIONS
vertisements. You can compensate for this.
OSD function Off
Tape speed SP
1
In the » SPECIAL FUNCTION«, select the » Volume limiter« line with
Volume limiter On
Factory preset
». . «.
Service
TXT
2 Adjust volume by selecting » On« with
3
Quit setting with the » TXT« button.
_________________________________
i « and then »OK«.
« or » F F «.
,
», « or
»F F « or »E E «.
CONVENIENCE FUNCTIONS
Selecting tape speed (SP, LP)
The selected tape speed remains in effect for the recording function until you adjust
this setting to a different tape speed.
SPECIAL FUNCTIONS
1 In the »SPECIAL FUNCTION« menu, select the » Tape Speed « line with
OSD function Off
Tape speed SP
, .
», « or ». «.
Volume limiter On
Factory preset
Service
2 Select tape speed » SP« or » LP« by pressing
TXT
3 Quit setting with the » TXT« button.
Entering switch-off time with the »SLEEP TIMER«
menu
You can enter a switch-off time for your combined TV/video unit with the
» SLEEP TIMER « menu. After the set time has elapsed, the combined TV/video
DIALOG CENTER
unit switches to standby mode.
SHOWVIEW
TIMER
LANGUAGE SELECTION
1 Call up the »DIALOG CENTER« by pressing »
SPECIAL FUNCTION
INSTALLATION
CLOCK
2 Select the »TIMER« line with
OK TXT
3
Select the »Sleep Timer« line with
– The »SLEEP TIMER« menu is displayed.
4 Enter the desired switch-off time (from 00 to 180 minutes) in 15-minute inter-
vals with » F F « or » E E
SLEEP TIMER
1 5
Note:
min.
CL
The switch-off time can be deleted with »CL«.
5
Quit setting with »TXT«.
____________________________________________________
»F F « or »E E «.
i « and then »OK«.
, .
», « or ». « and confirm with »OK«.
, .
», « or ». « and confirm with »OK«.
«.