Patient Remote Control - Boston Scientific Precision Spinal Cord Stimulator System Handbuch Für Klinisches Fachpersonal

Precision™ Spinal Cord Stimulator System Clinician Manual

Patient Remote Control

Basic Operation
The Remote Control communicates with the
Stimulator through a radio frequency (RF)
telemetry link from a distance of up to 60 cm
(2 feet).
The Remote Control goes into idle (or sleep)
mode when not in use. It can be reactivated
by pressing any button. To unlock the Remote
P
Control, hold down , until "Release P To
Unlock" appears.
Clinician Manual
90607862-22 Rev A 42 of 303
1. Area Button 4. Program Button
2. Up/Activate 5. Stimulation On/Off
3. Down/Save
Stimulation On/Off
Press the stimulation on/off button
time to turn the Stimulator on or off.
Signal Strength
The Remote Control indicates the
communication signal strength between itself
and the Stimulator in the upper right corner of
the display.
at any
!