Drive Assembly En - Abicor Binzel Mf1-Laser Front/Rear Betriebsanleitung

MF1-Laser Front/Rear
6.2 Drive assembly
1
Fig. 6
 Fig. 6 Attaching the medial plate on page EN-13
1 Place the MF1-Laser on the media plate.
2 Pay attention of the position of the dowel pins (2) in relation to the drill bushing (1).
1
Fig. 7
 Fig. 7 Attaching the MF1-Laser to the medial plate on page EN-13
3 Lock together the MF1-Laser and the media plate (1) with the quick release clamp (2) on the medial
plate.
4 Ensure that the parts lock in place.
2
Drill bushing
Attaching the medial plate
1
Media plate 2
Attaching the MF1-Laser to the medial plate
2 Dowel pin
2
Quick-release clamp 3
6 Commissioning
1
3
Tension lock
EN - 13