Replacing The Wire Feed Rollers En - Abicor Binzel Mf1-Laser Front/Rear Betriebsanleitung

6 Commissioning
5 Turn the lug on the tension lock (3) clockwise by at least 180°.
1
Fig. 8
 Fig. 8 Assembling the components on page EN-14
6 Insert the control lead (3), flex supply (1), and wire guide (2) into the appropriate connectors one after
the other.
6.3 Replacing the wire feed rollers
1 Open the housing cover at the lug and lift the cover up.
1
Fig. 9
EN - 14
1
Flex supply 2
Assembling the components
1
MF1-Laser Front
Opening the housing cover
Wire conduit 3
2 Housing cover
MF1-Laser Front/Rear
2
3
Control lead
2