Feeding In The Wire En - Abicor Binzel Mf1-Laser Front/Rear Betriebsanleitung

6 Commissioning
6.4 Feeding in the wire
Risk of injury
Physical injury caused by the start of the wire.
• Keep the process-side drive away from the body.
1 Open the housing cover.
 Fig. 9 Opening the housing cover on page EN-14
2 Swivel out the rocker arm.
 Fig. 10 Swivel open the rocker arm on page EN-15
1
Fig. 17
3 Thread the wire into the feeder side, manually or with the assistance of the rear wire feeder.
Ensure that the wire is fed correctly through the wire guides (1) on the MF1-Laser.
4 Swivel in the rocker arm.
EN - 20
CAUTION
2
Wire guide
Feeding in the wire
1
Wire
MF1-Laser Front/Rear
2