Commissioning - Abicor Binzel Mf1-Laser Front/Rear Betriebsanleitung

MF1-Laser Front/Rear
1
Fig. 5

6 Commissioning

Risk of injury due to unexpected start
The following instructions must be followed during all maintenance, servicing, assembly, disassembly, and
repair work:
• Switch off the power source.
• Close off the gas supply.
• Close off the coolant supply.
• Close off the compressed air supply.
• Switch off the entire welding system.
• Disconnect all electrical connections.
Risk of crushing
Hands can be pulled in and crushed by moving wheels.
• Do not reach into moving wheels.
NOTICE
• Please note the following instructions:
• The system may be installed and commissioned only by qualified personnel (in Germany, see
1 2
Wire actual value encoder 2
MF1-Laser Front/MF1-Laser Rear
DANGER
WARNING
 3 Product description on page EN-5
TRBS 1203).
MF1-Laser-Front 3
6 Commissioning
3
MF1-Laser-Rear
EN - 11