Drive Assembly - Abicor Binzel Mf3-Laser Front/Rear Betriebsanleitung

6 Commissioning

6.2 Drive assembly

1 Bore
Fig. 6 Attaching the medial plate
 Fig. 6 Attaching the medial plate on page EN-12
1 Place the MF3-Laser Front/Rear on the media plate.
2 Pay attention of the position of the dowel pins (2) in relation to the bore (1).
1 Media plate
Fig. 7 Attaching the MF3-Laser Front/Rear to the medial plate
 Fig. 7 Attaching the MF3-Laser Front/Rear to the medial plate on page EN-12
3 Lock together the MF3-Laser Front/Rear and the media plate (1) with the quick release clamp (2) on the medial
plate.
4 Ensure that the parts lock in place.
EN - 12
2
2 Dowel pin
1 2
2 Quick-release clamp
MF3-Laser Front/Rear
1
3
3 Tension lock
BAL.0511.0 • 2019-06-13