Driving Out; Maintenance; Spare Parts - Nederman Pneumatic Track System Bedienungsanleitung

6.2

Driving out

1. Make sure the nozzle is connected to the exhaust pipe.
2. Start the fan and open the station door (as an option the system has automatic
fan start). Drive the vehicle straight out from the garage. The nozzle automatically
disconnects when the vehicle is driven out.
A manual disconnection is possible with the switch on the safety coupling. See figure 7,
item B (Safety coupling release).
7

Maintenance

Read Chapter '3 Safety' before carrying out maintenance.
Installation, repair and maintenance work is to be carried out by qualified personnel
using only original Nederman spare parts. Contact your nearest authorized distributor or
Nederman for advice on technical service.
7.1

Spare parts

Contact your nearest authorized distributor or Nederman for advice on technical service
or if you require help with spare parts. See also www.nederman.com.
Ordering spare parts
When ordering spare parts always state the following:
• Part number and control number (see the product identification plate).
• Detail number and name of the spare part (see www.nederman.com).
• Quantity of the parts required.
Parts subject to wear are:
• Exhaust hose
• Safety coupler
• Nozzle
Pneumatic Track System, Track length 5.9 m or 9.4 m EN
17