File Open - Ditec Flashit Handbuch

If the board is switched on before the software is active, there will be no connection. To get
around this, it is possible (with the software already activated) to switch the board off and on
again. The connection process is activated within about half a second after the board is first
switched on. After this time, if the software is not open, there will be no connection.

3.6 FILE OPEN

The file to be uploaded must be a binary file, with the extension .bin. The file type is also
already indicated in the name because it has the prefix E_. Files with different charac-
teristics cannot be handled and are automatically rejected by the software.
File name with prefix E_ :
20