Available Languages; Com Selection - Ditec Flashit Handbuch

3.3 AVAILABLE LANGUAGES

When starting the software, the language available at start-up is always English. By clicking
on the available languages, a drop-down menu will open in which the desired language can
be selected. Once the new language is selected, all information will immediately be translated
into the new language, even for windows that are not yet active.

3.4 COM SELECTION

Before starting any activity, a serial port must be activated, which will be used by the software
to download updates to the board.
The serial port must be chosen from those available on the PC. You can get a complete list of
those available by clicking on the combo box at the top left (COMxx), in the Interfaces section.
Once the door has been located, it must be opened by clicking on the button to the right of the
OPEN SERIAL combo box. If the serial is suitable for use, the window changes color to green.
17