Herunterladen Inhalt Inhalt Diese Seite drucken

SOLIS VAC QUICK 576 Bedienungsanleitung Seite 51

Typ 576
Vorschau ausblenden Andere Handbücher für VAC QUICK 576:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
I.
SE A LI NG A BAG F ROM
VACUUM F IL M
1. Cut a suitable bag length from the film.
(see Fig. 1)
2. Open the appliance cover
by pulling up the left
and right release button in the case the appliance
cover is locked shut.
3. Place the open bag end on the sealing bar
open appliance. The bag end should not extend into
the vacuum chamber
.
(see Fig. 2)
4. Close the cover and push down on the two front
corners of the appliance cover until you hear a
„Click" from both sides. The cover is now locked
on both sides.
(see Fig. 3)
CAUTION: Never press the release buttons to close
the cover. Their only purpose is opening the cover.
5. Press the Seal (C) button in order to seal the end
of the bag. The green indicator light flashes several
times and goes out again when the sealing process
is finished.
(see Fig. 4)
6. Once the green indicator light goes out, pull up both
release buttons to open the cover.
(see Fig. 5)
7. Remove the bag with the sealed end.
8. Check if the seal seam is straight and without
creases. Should this not be the case, cut the seal
seam off and repeat the process.
100
Fig. 1
¥
of the
Fig. 2
Fig. 3
Fig. 4
Fig. 5
II. AU T O MATI C V AC U UM I NG AND S E ALI NG A FI L LE D B AG:
F U N CT I ON VAC UU M & SE AL (A)
1. Open the appliance cover
Fig. 6
and right release button in the case the appliance
cover is locked shut.
2. Place the fresh food into the bag. Please use the
original Solis vacuum bags or vacuum foil exclusively
to avoid damage to the appliance and to ensure best
results.
For item-numbers and descriptions, please read the
enclosed order form. You can purchase accessories
Fig. 7
for your vacuum sealer in good retailers or by mailing
Solis of Switzerland Ltd.
Telephone: 0848 804 884, Fax: 0848 804 890,
email: info.ch@solis.com or www.solis.ch
(shipping only within Switzerland).
3. Clean the open end of the bag inside and out,
then smooth it flat. The end must be free of dust
and wrinkles.
4. Place the open bag end in the vacuum chamber
Fig. 8
CAUTION: The air-extraction opening
covered by the bag end (see Fig. 6)!
5. Push the cover down by firmly pressing down on
both front corners of the appliance cover with both
hands until you hear a „Click" from both sides. Now
the cover is locked in at both sides.
(see Fig. 7).
CAUTION: Never press the release buttons to close
Fig. 9
the cover. Their only purpose is opening the cover.
6. Then press the Vacuum & Seal (A) button, now the
appliance will vacuum and seal the bag automatically
(see Fig. 8). During the extraction process, the blue
control light flashes. The green light by Seal will
start flashing additionally once the sealing process is
started.
Fig. 10
by pulling up the left
.
must not be
101

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis