Hama RC 600 Bedienungsanleitung Seite 7

Activating Alarm
When the ALARM 1/ ALARM2 is ringing, the relative alarm icon
• Press ALARM key to turn the alarm off
• Press the SNOOZE/LIGHTbutton alarm stops and the backlight will turn on for 5 seconds
with deleted, the repeat alarm indicator
f the alarm is not turned off, itwil stop automatically after 4 minutes.
Foreign Time Display & setting
UPbuttonfor 3 seconds,the icon Gwil turn on
• Press and hold the
• press and hold the Mode button for for 3 seconds in Foreign Time & Temperature display The
Foreign time can be set as described above by pressing the Up or DOWN button.
• press the MODE buttonagain to confirm the setting of foreign time
• Press and hold the UP button for 3 seconds to choose between local and foreign time display
Setting the Dual Time
• Thedualtime can beset by pressingMODE for 3 secondsin Dual
Time Display. The hour will flash for input.
• Press MODE:the hour of dual time display digits are blinking and can
firo-
be set by pressing up Or DOWN key
• Press MODE again:
the minute of dual time display digits are blinking and can be set by
pressingthe Upor DOWNbutton
• Press MODE again to confirm the setting
Light OWOFF
• press the SNOOZE/LIGHTbutton The back light will come on and
turn off automatically after 5 seconds
Motion sensor
The "ON/OFF" slider on the rear Ofthe device must be set to the "ON" position Moving your
hand directly over the motion sensor up to 30 cm away illuminates the display for approximately
5 seconds
Temperature function
Press OC/OF to select the temperature display between Celsius or
Fahrenheit.
12
00104959man_de_en_fr_nI pl.indd
/ be flashing
flashing The alarm sounds again after 4 minutes
12-13
Receiving the Time CODE
The clock will automatically receive the time code every hour.
Replacing the battery:
Please use only the types Ofbattery that are approved for this device and ensure that the polarity
is correct when inserting a new battery
13
06.11.12 15:21