cecotec RP Bedienungsanleitung Seite 111

Efficiency at low load
(10%)
No-load power
consumption
-- %
0.04 (for 115 V, 60 Hz); W
0.07 (for 230 V, 50 Hz)
Declared by the manufacturer based on the value calculated at
load condition 5.
External power supplies with a rated output power of 10 W or less
shall be exempted from this requirement.
In cases where multiple average active efficiencies are declared
for multiple output voltages available at load condition 1, the
value published shall be the value declared for the lowest output
voltage.
Declared by the manufacturer based on the value measured for
load condition 6.
ENGLISH
111
PRECISIONCARE 5IN1