Operation - Cecotec Rp Bedienungsanleitung

3. OPERATION

1. Select the attachment that best fits your needs.
2. Fix the desired attachment to the top part of the device body.
- To remove the shaving head or any other attachment
assembled, hold the shaver body with one hand and slightly
turn it counterclockwise with the other hand.
- To assemble a different one, insert the attachment into the
shaver's slot, then turn it slightly clockwise to fix it in place.
- To assemble the beard guide comb attachment, insert the
shaving head inside the guide comb and lock the attachment
fixing tab in place.
- The guide comb attachment includes a length-adjustment
knob. Length can be adjusted from 0.5 mm to 10 mm and
adapted to the desired haircut.
- To remove the guide-comb attachment, pull the back part off
the device until the fixing tab is released, then slide the comb
off the blade.
3. Slide the switch upwards to turn the device on and slide it
downwards to turn it off.
Note
The length of the cut may vary depending on the trimming angle.
Start with a longer guide-comb setting and progressively shorten
ENGLISH
101
PRECISIONCARE 5IN1