Hitachi PC-RLH13 Installations- Und Betriebshandbuch Seite 9

OPERATION & INSTALLATION MANUAL FOR PC-RLH13
5) Draw out the connecting cable from the wiring hole of the indoor unit, and lead the cable to the
installing position of the receiver kit.
6) Install the air panel (option) onto the indoor unit.
7) Attach the receiver kit in the following procedure.
 Draw out the connecting cable from the pocket and connect the connecting cable and the
wire of the receiver kit. After connecting the cable, wrap the connector with the cover and fix
them with a band.
Hook the band on the rear side of the
receiver kit at the pin of the air panel as
shown bellow.
Pin
Band
Connecting
Band
Cable
Cover
Band
Hook L- shaped nail on the rear side of
receiver kit at the square hole of the air
panel, and fix it with the screw.
L-shaped nail
Air Panel
Corner Pocket
Connecting
Cable
Receiver Kit
Screw
Nail (2 position)
3