Optional Functions - Hitachi Pc-Rlh13 Installations- Und Betriebshandbuch

4
OPERATION & INSTALLATION MANUAL FOR PC-RLH13
8) Attach other pocket cover (3 positions) to the air panel.

NOTE:
When removing the receiver kit after
installing the air panel;
1) Remove the screws of  (4
positions) from the front side of the
air panel.
2) Move the receiver kit with hands in
the arrow direction  and remove
the nails (2 position) of pocket
cover for corner, and slide the
receiver kit in the arrow direction
.

4 OPTIONAL FUNCTIONS

1) Open the lid of case by removing two screws so that the following functions are available.
Switch "COOL" Switch "HEAT"
2) Optional Setting for Dip Switch (SW3)
Operation Function
Setting of sub receiver kit
Identifying of Indoor Unit

NOTE:
An air conditioner can be operated both by wireless remote controller and by wired remote
controller at the same time.
Contact your distributor or dealer of Hitachi for details.
Dip Switch
(SW3; Factory Supplied)
Rear Side of Indoor Unit
DIP Switch Setting (SW3)
ON
1 2 3 4
ON
1 2 3 4
Remove the screw
Cover