VEVOR GB-GO16A-R Montageanleitung Seite 29

Use mild detergent or baking soda and hot water solution. Non-abrasive scouring
powder can be used on stubborn stains, then rinse with water."
If the paint is flaking off the inside surface of the barbecue lid, it means that the
grease build-up from baking has turned to carbon and is flaking off. Clean
thoroughly with a strong solution of hot soapy water. Rinse with water and allow to
dry completely. NEVER USE OVEN CLEANER.
INTERIOR OF BARBECUE BOTTOM
Remove residue using brush, scraper and/or cleaning pad then wash with a soapy
water solution. Rinse with water and allow to dry.
COOKING GRID
Use a mild soapy water solution. Non-abrasive scouring power can be used on
stubborn stains then rinse with water.
CLEANING THE BURNER ASSEMBLY
CAUTION: All cleaning and maintenance should be carried out when the barbecue
is cool and with the fuel supply turned OFF at the gas cylinder.
Turn the gas OFF at the control knob and disconnect the cylinder.
Remove cooling grate.
Clean the burner with a soft brush or blow clean with compressed air and wipe with
a cloth.
Clean any clogged ports with a pipe cleaner or stiff wire (such as an opened paper
clip).
Inspect burner for any damage (cracks or holes). If damage is found, replace with
a new burner. Reinstall the burner, check to ensure that the gas valve orifices are
correctly positioned and secured inside the burner inlet.
- 28 -