VEVOR GB-GO16A-R Montageanleitung Seite 26

This barbecue is designed for use outdoors, away from any flammable materials. It
is important that there are no overhead obstructions and that there is a minimum
distance of 122cm from the side or rear of the appliance. It is important that the
ventilation openings of the appliance are not obstructed. The barbecue must be
used on a level, stable surface. The appliance should be protected from direct
draughts and shall be positioned or protected against direct penetration by any
trickling water (e.g. rain).
Make sure that the gas cylinder compartment (if any) is not obstructed, keep it
ventilated and clean.
Parts sealed by the manufacturer or his agent must not be altered by the user.
No modifications should be made to any part of this barbecue and repairs and
maintenance should only be carried out by a CORGI registered service engineer.
Connection to Appliance
Before connection, ensure that there is no debris caught in the head of the gas
cylinder, regulator, burner and burner ports. Spiders and insects can nest within
and clog the burner/venturi tube at the orifice. A clogged burner can lead to a fire
beneath the appliance.
Clean burner holes with a heavy-duty pipe cleaner.
Fit the hose to the appliance using a spanner to tighten it onto the connection
thread. If the hose is replaced it must be secured to the appliance and regulator
connections with hose clips. Disconnect the regulator from the cylinder
(according to the directions supplied with the regulator) when the barbecue is not
in use.
The Barbecue must be used in a well ventilated area. Do not obstruct the flow
of combustion air to the burner when the barbecue is in use. ONLY USE THIS
BARBECUE OUTDOORS.
- 25 -