Technical Data - Vevor Gb-Go16A-R Montageanleitung

4.Any LP cylinder not connected for use shall not be stored in the vicinity of this or
any other appliance.
Assembly
WARNING: Whilst every effort has made in manufacture of your barbecue to
remove any sharp edge, you should handle all components with care to avoid
accidental injury.
Tools required: Either a Philips cross head or flat-bladed screwdriver and either a
spanner (we have supplied a multi-function spanner ) or a pair pliers.
ASSEMBLY:
Please read all instructions thoroughly before proceeding. Find a large, clean area
in which to assemble your trolley barbecue. Please refer to the parts list and
assembly diagram as necessary. The assembly of the barbecue involves many
large parts and it is recommended that two people assemble it.
NOTICE: Make sure all the plastic protection rip off before assembling!

TECHNICAL DATA

GB-GO16A-R: Total heat input: 5 . 6 kW
Gas consumption: G30: 408g/h, G31: 400g/h
Gas bottle: Gas cylinder height could not exceed 0.6m, The diameter of the
cylinder shall not exceed 310 mm.
Make sure the gas cylinder is lower than the gas connection/gas inlet
Always place gas cylinder/bottle on a flat level surface. DO NOT fix on trolley. Care
should be taken so the gas hose and gas cylinder do not come in contact with hot
surfaces or sharp edges, and should not pass under the barbecue
Pressure reducer: comply with EN 16129:2013 (Flow rate: max. 2 kg/h)
Gas hose: comply with EN standard or local market standard (max. 1.5m, max. FI
- 19 -