Cinq Shift R tour Bedienungsanleitung Seite 20

slower gear
faster gear
Therefore you can choose your desired shifting logics by connecting the
shifter cable to either the right or the left gear lever on your handle bar.
4a Shift:R Tour Make sure the cable adjusters are in a middle position before
you clamp the shifter cables at the levers to ensure adjustment range later.
Slightly pull the cable ends and tighten the cable fastener with an Allen key.
4b Shift:R Road Position the quickadjuster correctly and direct the cable to
the cable fixing bolt. The shift cable needs to be slightly preloaded before
securing the fixing bolt (4 Nm). Micro­adjust with the quickadjusters. Cut the
cable approx. 10 mm behind the last cable channel and attach the end cap.
5 Check the shifting function by pushing the levers one at a time.
If proper shifting function is not given, proceed as follows:
max. 2.5 Nm
4 Nm