Maintenance And Care; Special Accessories; Troubleshooting; Technical Specifications - Kärcher MV 2 Originalbetriebsanleitung

Maintenance and care

Danger
Turn off the appliance and re-
move the mains plug prior to any
care and maintenance work.
Repair works may only be per-
formed by the authorised cus-
tomer service.
Warning
Do not use abrasives, glass or
universal cleaners! Never im-
merse the appliance in water.
Clean the appliance and accessory

parts made of plastic with a com-
mercial plastic cleaner.
If required, rinse the container and

accessories with water properly
and dry them before reuse.
Illustration
When necessary, clean the foam or

cartridge filter under running water
only, do not wipe or brush down. Al-
low to dry completely prior to instal-
lation.

Special accessories

You can install a cartridge filter instead
of a foam filter.
Prior to installing the cartridge filter,

remove the black cover cap and
keep it for later use with the foam fil-
ter.
Insert the cartridge filter and lock it

with a bajonet lock.
14

Troubleshooting

Decreasing cleaning power
If the cleaning power of the appliance
deteriorates please check the follow-
ing:
Accessories, suction hose or suc-

tion tubes are clogged, please re-
move the obstruction using a stick.
Filter bag is full, install new filter

bag.
Foam filter is contaminated, clean it

under running water.
Cartridge filter is dirty, knock off dirt

from cartridge filter and clean under
running water if necessary.
Replace damaged filter.


Technical specifications

Mains voltage
1~50/60 Hz
Mains fuse
(slow-blow)
Container capacity
Water intake with
handle
Water intake with
floor nozzle
Output P
nom
Power cord
Weight (without
accessories)
Sound pressure
level
(EN 60704-2-1)
Subject to technical modifications!
– 9
EN
220 - 240 V
10 A
12 l
5,5 l
3,0 l
1000 W
H 05VV-F2x0,75
4,5 kg
77 dB(A)