VEVOR TCD35 Benutzerhandbuch Seite 8

INPUT
MODE
L
M
H
*the voltage is theoretical value,there may be a deviation in different
sceneries.
*Due to the different output voltages between vehicles,H should be set
when the product s connected to car power,and M or L should be set when
it is connected to a portable battery or other back-up battery.
• Switch between single and double compartment:
• When double compartments are working, press the▲key and▼key on
left or right compartment at the same time for 2 seconds,the left or right
compartment box stops cooling, and the corresponding compartment
display will screen off.
• When a single compartment is working, press the▲key and▼key of the
unworking compartment for 2 seconds at the same time, the compartment
will resume function, and the corresponding display will screen on.
• When a single compartment is working, it is not allowed to press the▲
key and▼key for 2 seconds to turn off the other compartment.
DC 12V
CUT OUT
9.6V
10.4V
11.1V
CUT IN CUT OUT
10.9V
11.7V
12.4V
- 6 -
DC 24V
CUT IN
21.3V
22.8V
24.3V
22.7V
24.2V
25.7V