Teka DHB-60 Bedienungsanleitung Seite 11

Index
Description of the appliance
Instructions for use
Cleaning and maintenance
Problem solving
Sizes and specifications
Accessories supplied
Installation
Active charcoal filters
Description of the appliance
A An electronic programme device to
control lighting,
saturation of the filters and the
operation display.
B Metal filters.
C Lamps - 20 W (G-4).
D, E Vertically adjustable tubecovers.
You may control the kitchen hood by
Page
operating the controls as shown in the
diagram.
11
11
12
12
12
13
13
13
Switch on the extractor fan a few minutes
before you start to cook in order to ensure that
a steady air flow has been established before
fumes appear.
programming,
Allow the extractor fan to run for several minutes
after you have finished cooking (between 3 to 5
minutes) in order to expel all the grease from the
outlet duct. This prevents the return of grease,
smoke and smells.
Program the period of aspiration:
1) Switch on the cooker hood and choose the
required aspiration speed.
2) Push 'Timer'.
3) Select the required programming time pushing
"
maximum time is 99 minutes.
4) After selecting the programming time push
'Timer' again in order to save the changes. The
velocity and remaining programming time is
displayed alternately.
The maximum speed 'H' can only be selected
manually and will be changed automatically to the
speed of level 2 after approximately 10 minutes.
Saturation of the filters:
When the sign 'Saturation of the filters' is on, the
filters should be cleaned (turn to page 12: 'Cleaning
of the filters'). After cleaning the filters simultane-
ously push "
whereupon the sign will be switched off.
Instructions for use
or ". The minimum time is 1 minute, the
and " for at least 3 seconds
11