Power Levels - O2Feel Duma Serie Benutzerhandbuch

Buttons
•
+
Toggles the PAS settings, cycles through the function menus, or adjusts menu settings in
order when pressed.
•
Activates/Deactivates your main lighting when held alone.
•
Accesses/Exits the function menus when held together with -
•
M
Toggles the central display or allows menu settings adjustment when pressed.
•
Activates/Deactivates the HMI or confirms menu settings adjustment when held.
•
-
Toggles the PAS settings, cycles through the function menus, or adjusts menu settings in
reverse when pressed.
•
Operates the push assist when held alone.
•
Accesses/Exits the function menus when held together with +
Powerlevels
The bike has 3 powerlevels. Choose the support by
using + and -.
The 3 support levels are LOW-AUTO-HIGH. The
higher support you choose, the stronger the motor
assists.
Using the bike
1. Switch on the bike by pressing the ON/OFF button located on the display,
• Do not put your feet on the pedals when you are switching on the bike. This may cause a system error.
• The power supply cannot be activated when charging.
2. Choose your preferred assistance mode.
Steep slope
3. Assistance starts when the pedals start to turn.
4. Change your assistance mode depending on your cycling conditions.
5. Turn off the bike when you are no longer using it.
Walk assist
The walk assist function can help if you need to
walk up an inclination holding the bike.
Press the - until the walk assist symbol appears. As
long as the - button is pressed, the walk assist is
supporting with up to 6km/hr. When the - button
is released, the walk assist stops.
Gentle slope or flat surface
25
Long distance on flat surface