Language; About; Reset Setting - A-Rival Nav-Pnf Hardware-Benutzerhandbuch

Devices settinqs
Function menu appears as shown left-below.
2. Tap the knob
to adjust the backlight. To decrease the
backlight, tap
. To increase the backlight, tap
3. When tap button, the device will enter into an auto adjustment
backlight state.
Now, if the environment beam is very bright, the display screen of the device will
become light, if the environment beam is very dark, the display screen of the
device will become dark. When the device is opening, if you don't operate it for a
while, the device will become dark to enter into a saving electricity state.

3.5 Language

1. Tap
button on the Device Settings menu. The Language
Language
Function menu appears as shown below.
2. Tap the knob
and
3. After accomplishing, tap the knob
3.6 Calibrate
Youcan calibratethe touch screenif it is not respondingaccuratelyto your Taps.
to select language.
to exit.
14
Devices settinqs
1. Tap "calibrate" button on the Device Settings menu. The calibrate Function
menu appears as shown below.
2. Tap and hold the centre of the target, the target moves to the position of
left-up. When again tap and hold the centre of the target, the target moves the
Next position of left-down.
3. The target moves to five position
Center) in order, forming a period. If nicetily tap and hold the target each time,
after a period, the target is Disappear,
process and backs tothe Device Settings menu.
3.7 Ab
1. Tap button on the Device

About

menu appears as shown below.
2. After accomplishing, tap the knob

3.8 Reset Setting

button on the About
Reset
(Left-up' left-down' right-up' right-down'
the device completes the calibration
Settings menu. The About Function
to exit.
Function menu to enter into "Reset"
15
menu.