Top Components; Side Components; Connecting Toac Powerandchargingthe Battery(Optional) - A-Rival Nav-Pnf Hardware-Benutzerhandbuch

Gettinq Started
Ref Component
3 Reset Button

Top Components

1
Ref
Component
ON/OFF Switch The main power/battery cut off switch.
2
pen

Side Components

Ref Component
1 mcroSD Slot Accepts a microSD (Secure Digital)
accessing data such as Music.
2 Mini-USB Connector
3
Build-in TMC connector
Description
Restart system.
2
Description
3
1
2
Description
card
Connect to the USB cable.
Connect to TMC Antenna.
6
Gettinq Started

1.2Connecting toAC PowerandChargingthe Battery(Optional)

When chargingthe battery for the first time, you should charge it for at least 8
hours.
1. Slide and clickthe connectorconverteronto theAC adapter.
2. Connectthe adaptercable to the bottomof your device.
3. Plug the AC adapter into a wall outlet.
The chargeindicatorglows redwhen charging is in progress.Do not disconnect
your devicefrom AC power until the batteryis fully charged,when the charge
indicator turns amber. This will take a couple of hours.
NOTE:
. Do not immediatelyturn on your deviceafter connectingtheAC adapter to
charge a power-depletedbattery.If you need to turn on the device again,wait
for at least one minute.
Depending on yourregionof purchase, t he connector c onvertermaynot look
exactly the same as the picture shown.
Yourdevice can also be chargedwhen it is connectedto a desktop computer
via the USB cable.
CAUTION: For optimal performance of the lithium battery, take note of the
following:
for
Do not charge the battery where the temperature is high (e.g. in direct
sunlight).
. Thereis noneedto fullydischarge thebatterybeforecharging. Y oucancharge
the battery before it is discharged.
Ifyouwill not usethe productfora longperiodof time,be sureto fully charge
the batteryat leastonceeverytwoweeks.Overdischarge of the batterycan
affect the charging performance.
7