VEVOR P2001-3 Originalanleitung Seite 7

2.2.Installation Step for fence
Note: The pieces need to be connected based on following procedure:
connect the top hinge first and then insert the retractable pole into the
bottom connector, push it upward and connect together.
1） .Connect two panels for one side.
3）.Repeat, connect the third side.
Note: You can change it's dimension or the shape by adding or removing
some panels
2.3.Wrong Installation Step
2).Connect another 2 panels
for the second side.
4).Connect the last side
Do not install the reminder
label side inside, all zippers
should be put outside.
- 6 -