VEVOR P2001-3 Originalanleitung Seite 5

Noted: The switch of the upper tube and the connector of the lower tube
must be placed on the same side (this means hinges should stick out on
the same side), otherwise the panels cannot be connected with each other.
1.2.Installation Step for Single Panel
1）. Connect the side tube to
the bottom tube.
3）. Match the suitable upper
tube to the side tube.
Noted:
1.After installing single pieces, please carefully check whether the zippers
properly closed and the corresponding steel tubes are aligned.
2.For the sake of safety,please make sure that all single pieces are
installed correctly according to the instructions before connecting them
together.
2）.Insert the corresponding
fabric cover into the side tube.
4）.Close both zippers around
the tubes.
- 4 -