Safety Symbols; Symbol Meaning; Safety Instructions - EGO ST1300E Bedienungsanleitung

READ ALL INSTRUCTIONS!
READ & UNDERSTAND
INSTRUCTION MANUAL
Residual risk!
People with electronic devices, such
as pacemakers, should consult their physician(s) before
using this product. Operation of electrical equipment
in close proximity to a heart pacemaker could cause
interference or failure of the pacemaker.
WARNING:
To ensure safety and reliability, all
repairs and replacements should be performed by a
qualified service technician.

SAFETY SYMBOLS

The purpose of safety symbols is to attract your attention to
possible dangers. The safety symbols and the explanations
with them deserve your careful attention and understand-
ing. The symbol warnings do not, by themselves, eliminate
any danger. The instructions and warnings they give are no
substitutes for proper accident prevention measures.
WARNING:
Be sure to read and understand all safety
instructions in this Operator's Manual, including all safety
alert symbols such as "DANGER," "WARNING," and
"CAUTION" before using this tool. Failure to following all
instructions listed below may result in electric shock, fire,
and/or serious personal injury.

SYMBOL MEANING

SAFETY ALERT SYMBOL:
ING, or CAUTION. May be used in conjunction with other
symbols or pictographs.
WARNING:
power tools can result in foreign objects
being thrown into your eyes, which can
result in severe eye damage. Before
beginning power tool operation, always
wear safety goggles or safety glasses with
side shields and a full face shield when
needed. We recommend a Wide Vision
Safety Mask for use over eyeglasses or
standard safety glasses with side shields.

SAFETY INSTRUCTIONS

This page depicts and describes safety symbols that may
appear on this product. Read, understand, and follow
all instructions on the machine before attempting to
assemble and operate.
Indicates DANGER, WARN-
The operation of any
56 VOLT LITHIUM-ION CORDLESS LINE TRIMMER — ST1300E
Precautions that involve your
Safety Alert
safety.
To reduce the risk of
Read
injury, user must read and
Operator's
understand operator's manual
Manual
before using this product.
Always wear safety goggles
Wear Eye or safety glasses with side
Protection shields and a full face shield
when operating this product.
Wear Ear Always wear ear protection
Protection when operating this product.
Line Diam- The Diameter of the nylon
eter cutting line
33cm
Cutting The Max. cutting width of
Width line trimmer
No Cutting Do not install metal or plastic
Blade cutting blades
Do Not Do not use in the rain or
Expose To leave outdoors while it is
Rain raining.
Ensure that other people and
Keep
pets remain at least 15m
Bystanders
away from the line trimmer
Away
when it is in use.
Ensure that other people and
Keep
pets remain at least 15m
Bystanders
away from the line trimmer
Away
when it is in use.
V Volt Voltage
A Amperes Current
Frequency (cycles per
Hz Hertz
second)
W Watt Power
min Minutes Time
Alternating
Type of current
Current
Direct Type or a characteristic of
Current current
No Load
n Rotational speed, at no load
Speed
0
... /min Per Minute Revolutions per minute
EN
5