Activating/Deactivating The Alarm - Hama RC 660 Bedienungsanleitung

5.4. Alarm
Setting the alarm time
• Move the LOCK slide switch (12) to the ALARM SET position to manually set the
alarm time (2).
• Repeatedly press the 12/24/YEAR button (8) to set the time of alarm 1 (2) or alarm
2 (2).
• Either the symbol or the
• Set the hour by pressing the HOUR/MONTH button (9).
• Set the minute by pressing the MIN/DATE button (10).
• If necessary, press the 12/24/YEAR button (8) again to set the other alarm.
• Move the LOCK slide switch (12) to the LOCK position to save your settings and
return to normal mode.
• Repeatedly press the HOUR/MONTH button (9) to display the set time of alarm 1
(2) or alarm 2 (2).
• The corresponding symbol (
• By default, in normal mode (LOCK) the time for alarm 1 (2) is displayed.

Activating/deactivating the alarm

• Press the HOUR/MONTH button (9) once or repeatedly and hold it for about 3
seconds to enable or disable one of the alarms.
• If an alarm is activated, the corresponding symbol (
Select alarm mode
• Move the ALARM SELECT slide switch (13) to the WORKING DAY position.
• If alarm 1 or alarm 2 is activated, the weekday alarm only triggers an alarm on
weekdays (Monday to Friday). ALW (7) appears on the display.
• Move the ALARM SELECT slide switch (13) to the NORMAL position.
• If alarm 1 or alarm 2 is activated, the normal alarm triggers an alarm daily. The
display does not show any additional indicator.
Note – Alarm mode
Selecting an alarm mode (WORKING DAY or NORMAL) only has an effect if an
alarm is enabled.
symbol is displayed accordingly.
or ) is displayed for about 10 seconds.
or ) is displayed.
7