Chopard Classic Racing GMT Bedienungsanleitung Seite 10

Setting the 24-hour GMT display and the main time (see
diagram on page 4)
Position I Rest position, the clock is working.
Position II Quick correction of the 24-hour GMT display:
• Pull out the crown to position II, the clock will continue to
operate;
• Turn the crown counterclockwise until the desired time zone is
displayed;
• Push the crown back to position I, the clock will start again.
Position III Setting the time:
• Pull out the crown to position III, the clock stops;
• Turn the crown in the desired direction until the current time is
displayed;
• Be careful to keep to the 24-hour cycle!
• Push the crown back to position I, the clock will start again.
• Case, bezel and time-setting crown in 316L stainless steel,
with a different finish depending on the model
• Dial and hands in brass, with a different finish depending on
the model
• 24-hour GMT display of hours, minutes and the second time
zone
• Brass hour and minute hands with Super-Luminova
luminescent coating
• Brass GMT hand with red indicator at the tip
CLASSIC RACING GMT TABLE CLOCK
TECHNICAL FEATURES
10
®