Safety Instructions; Designated Use; Installation And Commissioning; Operational Safety - Endress+Hauser Micropilot M FMR250 Montageanleitung

Safety instructions

1 Safety instructions
1.1

Designated use

The horn cover is a retrofitting part for Micropilot M FMR240 and FMR250 level measurement
devices.
1.2

Installation and commissioning

1.2.1 Authorised personnel
All operations described in this mounting instructions manual must be carried out only by
trained specialist personnel authorised by the operator.
During work on and with the device the required personal protection equipment must always
be worn.
1.2.2 Warning about misuse
Inappropriate or incorrect use of the instrument can give rise to application-specific hazards, e.g.
vessel overfill or damage to system components through incorrect mounting or adjustment.
1.3

Operational safety

1.3.1 General safety instructions
The safety information in the operating instructions of the respective sensor must be noted.
1.3.2 Hazardous areas
"
Caution!
The horn covers 80 mm (3") and 100 mm (4") are not allowed for the use in the hazardous areas.
4
Micropilot M FMR240/250
Endress+Hauser