Manufacturer's Information; Delivery; Packaging; Transport - Gemü Rsk Betriebsanleitung

8 Manufacturer's information

8 Manufacturer's information

8.1 Delivery

● Check that all parts are present and check for any damage
immediately upon receipt.
The product's performance is tested at the factory. The scope
of delivery is apparent from the dispatch documents and the
design from the order number.

8.2 Packaging

The product is packaged in a cardboard box which can be re-
cycled as paper.

8.3 Transport

Sharp edges!
▶ Risk of cutting injuries!
Wear protective gloves.
●
Adequately secure the valve.
●
GEMÜ RSK
CAUTION
Damage to property due to improper handling during un-
packing and transport!
▶ If lifted incorrectly, the valve (primarily on products > DN
100) may open due to its own weight and the product
may become damaged.
Hold the product horizontally so that the valve can only
●
open upwards.
1. Observe the specifications on storage, including during
transport.
2. Only transport the product by suitable means. Do not drop.
Handle carefully.
3. When transporting over long distances, use the original
packaging or equivalent packaging.
4. Dispose of transport packing materials according to relev-
ant local or national disposal regulations/environmental
protection laws after installation.
5. For products with a large nominal size that cannot be
moved by hand, use suitable lifting tackle.
6. Only use lifting tackle on the housing or eye bolt of the
product, and not on the internal components.
7. Hold products > DN 100 horizontally so that the product
can only open upwards.
Correct handling:
Incorrect handling:

8.4 Storage

1. Store the product free from dust and moisture in its ori-
ginal packaging.
2. Avoid UV rays and direct sunlight.
3. Do not exceed the maximum storage temperature (see
chapter "Technical data").
4. Protect the product, particularly the connection and seal-
ing surfaces, from mechanical damage.
5. Do not store solvents, chemicals, acids, fuels or similar
fluids in the same room as GEMÜ products and their spare
parts.
6. Protect the product, particularly the connection and seal-
ing surfaces, from mechanical damage.
7. Close the compressed air connections with protection
caps or sealing plugs.
8. Avoid storing for too long to prevent seals from ageing
and functional impairment.
48 / 60
NOTICE
www.gemu-group.com