Installing Your New Appliance - Hisense Rl5K370Gsfc1 Bedienungsanleitung

Installing your new appliance

Before using the appliance for the first
time, you should be aware of the
following tips.
Ventilation of appliance
In order to improve efficiency of
the cooling system and save
energy, it is necessary to maintain
good ventilation around the
appliance for the dissipation of
heat. For this reason, sufficient
clear space should be available
around the refrigerator.
Suggest:
In the non-build-in status,it is
advisable for there to be 50-70mm
of space from the back to the wall,
at least 100mm from its top, at
least 100mm from its side to the
wall and a clear space upfront to
allow the refrigerator door to open
105°. See in follow diagrams. Please
refer to the diagrams below.
A
B
C
In the non-built-in status
C
100mm Above
A
B 50- 70mm Behind
C
100mm Each Side
Reserve a gap of more
than 5mm on the top side
Reserve a gap of more
than 2.5mm on the left
side
Product size(mm) : 595*600*1856
In the built-in status
2.5mm
≥
Door closing status for refrigerator in the built-in status
The total space required for the refrigerator to fully
open the door in the built-in status
In the built-in status,energy
consumption will increase
significantly.
Reserve a gap of more
than 2.5mm on the right
side
≥ 2.5mm
595mm
765mm
Note
13