Installing Your New Appliance - Hisense Rb3K330Saic Benutzerhandbuch

Installing your new appliance

Before using the appliance for the first
time, you should be aware of the
following tips.
Ventilation of appliance
In order to improve efficiency of
the cooling system and save
energy, it is necessary to maintain
good ventilation around the
appliance for the dissipation of
heat. For this reason, sufficient
clear space should be available
around the refrigerator.
Suggest:
It is advisable for there to be 50-
70mm of space from the back to
the wall, at least 100mm from its
top, at least 100mm from its side to
the wall and a clear space upfront
to allow the freezer door to open
130°and refrigerator door to open
135°. See in follow diagrams. Please
refer to the diagrams below.
In the non-build-in status
Reserve a gap of more
than 5mm on the top side
Reserve a gap of more
than 2.5mm on the left
side
Product size(mm) : 595*600*1856
In the build-in status
≥ 2.5mm
Door closing status for refrigerator in the build-in status
The total space required for the refrigerator to fully
open the door in the build-in status
In the build-in status,energy
consumption will increase
significantly.
Reserve a gap of more
than 2.5mm on the right
side
2.5mm
≥
595mm
Note
13