Hisense RL5K370GSFC1 Bedienungsanleitung Seite 64

Display controls
•The distance between your
appliance and the Wi-Fi router can
impact the performance. If they are
too far apart pairing your appliance
might fail or take longer.
• The appliance supports 2.4 GHz Wi-
Fi networks only. The Wi-Fi network
SSID must be visible.
•The surrounding wireless
environment other connected
devices) can affect the
performance of your network.
•Your appliance Wi-Fi connection
may experience interruptions due to
external factors such as your home
network environment or Internet
service provider.
Connecting your refrigerator
After installing the Connectlife app,
sign in or create an account and
follow these steps:
1. Ensure the appliance is powered on
and the display panel is active.
You'll know it's ready when the panel
lights up.
2. Press and hold the Wi-Fi button for 3
seconds until you hear a beep and
" light flashing after it
see the "
constantly on for a few seconds.
Note
3. Ensure Bluetooth is enabled on
your phone and open the
ConnectLife app. Look for the pop-up
indicating that a new appliance has
been found. Tap the button on the
pop-up and follow the instructions to
proceed.
4. If a pop-up doesn't appear, tap the
button called " Add appliance" or "+"
in the app.
5. Locate "Refrigerator" in the device
list and select it.
6. Follow the instructions in the app
to connect your refrigerator. Once
the setup is complete, your
refrigerator will appear on your
home screen.
•The appliance will remain in pairing
mode for a maximum of 5 minutes.
•The factory reset your network
settings, press and hold the Wi-Fi
button for 6 seconds. You will hear
two beeps once the appliance is
reset.
•After resetting, the appliance will
automatically go into pairing mode.
•A solid Wi-Fi light indicates the
appliance is successfully connected
to the home network.
Note
20