Configuration; Basic Setup; Image Settings Using The Osd Menu - BELINEA 10 19 20 Bedienungsanleitung

ENGLISH

CONFIGURATION

Monitor setup under Windows 9x/ME/2000 and XP:
If using the monitor under Windows 9x/ME/2000 or XP, we
strongly recommend installing the Belinea configuration
file. You can obtain this file from your Belinea dealer or
download it from the MAXDATA FTP server at
ftp.maxdata.com.
Here, click the "Belinea_Treiber_Driver" directory and
download the Belinea.inf and README_Berlinea.TXT
files. Follow the installation instructions in the
README_Belinea.TXT file.

BASIC SETUP

Automatic Image Adjustment ...................................
You can adjust the image settings (such as brightness,
contrast, image position, phase etc) manually or by using
the LCD monitor's automatic image adjustment feature.
This will adjust the image parameters to their optimal
settings for the current graphics mode. Press AUTO (
in fig. 4) to launch the automatic adjustment. The process
will take a short while until completed.
MUTE Adjustment .....................................................
You can shut off the sound playback by pressing the
'
MUTE button ( in fig. 4). Press the button again to turn the
sound back on.
Selecting the Input Signal (Source) ........................
You can change the input signal from analog to digital
directly by pressing the SOURCE button (
change the source signal back, press the same button
again.

IMAGE SETTINGS USING THE OSD MENU

The OSD menu is a window on your screen that allows
you to view and change display settings. To change an
OSD setting:
Figure 4. Monitor features
12 - Belinea 10 19 20
Monitor setup under Windows NT 4.0:
Under Windows NT 4.0 no separate setup file is required.
Select the vertical frequency and the number of colors
directly from within the "Settings" & "Control Panel" &
"Display" & "Settings" menu.
Shortcut for adjusting contrast and brightess ......
You can adjust contrast and brightness directly by
pressing the - or + buttons (( and ) in fig. 4) while the
OSD menu is not displayed. Press the + button to
increase the contrast/brightness or - to decrease it.
$
Shortcut for adjusting audio system's speaker
volume ..........................................................................
While the OSD menu is not being displayed, you can adjust
the integrated audio system's speaker volume directly by
pressing the VOL button (
to increase or decrease the volume.
!
in fig. 4). To
1. Press the MENU button (
OSD menu on the screen.
2. There are a total of 6 OSD submenus divided by
categories. Select the desired submenu by pressing
the OSD button
Functions").
3. Press the OSD button SELECT (
the selected function or associated submenu.
4. If you selected a submenu, now select the subfunction
you want using the
the SELECT button.
5. Set the desired value using the OSD button
6. Press the MENU button to save the setting. Repeat
steps 2-5 to make further adjustments as needed.
7. The OSD menu automatically disappears if no changes
are made for more than 35 seconds (default setting).
The current settings will be saved. You can close it
manually by pressing the MENU/EXIT button.
'
+ -
in fig. 4). Press the / button
%
in fig. 4) to display the
+
-
or (see section "OSD Menu
$
in fig. 4) to activate
+
-
or OSD buttons, then press
-
or
+
.