Important Information; Caring For Your Lcd Monitor; Wall Mounting - BELINEA 10 19 20 Bedienungsanleitung

ENGLISH

IMPORTANT INFORMATION

Note on monitor placement
•
The setup location must not be extremely hot, cold,
humid or dusty. Heat and cold can impair the
functionality of the monitor. Humidity and dust can
cause the monitor to fail.
•
Don't place the monitor near heaters such as
radiators or the like. Don't expose the monitor to
mechanical vibrations or jarring.
•
Position the monitor so that no direct light or sun
strikes the screen, which could cause reflections
that reduce the quality of the image.
Notes on power connection
Only use the power cord designated for use in
your country.
The wall outlet should be within easy reach. Pulling
the power plug is the only way to disconnect the
monitor from the power source.
This monitor is ENERGY STAR ® -compatible.
•
MAXDATA is an ENERGY STAR ® partner and
guarantees that this device complies with the
ENERGY STAR ® guidelines for optimizing power
consumption.
Safety instructions for operation
The power cord must not be damaged. Do not
place any objects on the power cord and make
sure it does not have any knots. To unplug the
cord, always pull on the plug and not on the cable
itself. Damage to the power cord may result in fire
or cause electric shocks.

CARING FOR YOUR LCD MONITOR

•
First, unplug the power cord from the wall socket.
•
If the LCD screen is extremely dirty, clean it with a
moist cloth. Use only warm water and then wipe the
monitor dry. Solvents or harsh cleaners can damage
the housing. Clean the display surface only with a
soft cloth, otherwise you may damage the display's
coating.

WALL MOUNTING

The Belinea-monitor is shipped with the standard desktop configuration. However, you can optionally mount the device
on a wall or on a monitor swivel arm (optional accessory). Please follow the corresponding instructions
(4-hole assembly with a spacing of 4 × 4 inches (100 × 100 mm) according to the international VESA FDMI standard).
10 - Belinea 10 19 20
•
Avoid covering the ventilation slots. Air circulation is
necessary to prevent the monitor from overheating.
If the air circulation is restricted it could cause fire or
damage the monitor.
•
Do not use any solvents to clean the monitor, as
the housing could be damaged. For more
information about cleaning the monitor, please see
"Caring for Your LCD Monitor".
Never open the monitor housing yourself. There
is a danger of electric shock and other hazards.
The monitor may only be opened and serviced by
qualified professionals.
Note on resolution
All resolutions provided by the graphics card that
deviate form the physical resolution of the panel
are adjusted by interpolation. This can impair the
image quality.
Notes on ergonomics
To protect your eyes, neck and shoulder muscles
when working with a computer, we recommend
that you maintain a viewing distance of between
50 and 75 cm from the monitor. Furthermore, you
should regularly focus on an object around 6 m away
from you to help your eyes relax. Ergonomically,
you're posture is best when elbows, pelvis, knees
and ankles are all at right angles.
•
If the monitor is only slightly dirty, clean it using a soft,
dry and antistatic cloth.
•
The LCD monitor's screen surface is very sensitive.
Please avoid any contact with the surface (finger,
pencil etc.) and be especially cautious during
transportation since jolts and shocks can cause the
screen to become scratched (always use the original
packaging).