Configuration; Basic Setup; Image Settings Using The Osd Menu - BELINEA 10 17 10 Bedienungsanleitung

ENGLISH

CONFIGURATION

± Monitor setup under Windows
and XP:
If using the monitor under Windows
or XP, we strongly recommend installing the Belinea
confi guration fi le. You can obtain this fi le from your
Belinea dealer or download it from the MAXDATA FTP
server at ftp.maxdata.com.
Here, click the "Belinea_Treiber_Driver" directory
and download the Belinea.inf and README_Belinea.
TXT fi les. Follow the installation instructions in the
README_Belinea.TXT fi le.

BASIC SETUP

➧ Automatic Image Adjustment ..................................
You can adjust the image settings (such as image posi-
tion, phase, etc.) manually or by using the LCD monitor's
automatic image adjustment feature. This will adjust the
image parameters to their optimal settings for the current
graphics mode. Press SELECT/AUTO (
launch the automatic adjustment. The process will take
a short while until completed.
± Setting the volume directly ......................................
While the OSD menu is not being displayed, you can
adjust the integrated audio system's speaker volume
directly by pressing the VOLUME button (
4). Press the or buttons (
decrease or increase the volume.

IMAGE SETTINGS USING THE OSD MENU

The OSD menu is a window on your screen that allows
you to view and change display settings. To change an
OSD setting:
1. Press the MENU button (
OSD menu on the screen.
2. There are a total of 10 OSD submenus divided by
categories. Select the desired submenu by pressing
the OSD button or
section "OSD Menu Functions").
MENU SELECT
AUTO
1 2
Figure 4. Monitor features
12 - Belinea 10 17 10
® 9x/ME/2000
9x/ME/2000
®
in fi g. 4) to
in fig.
and in fig. 4) to
in fi g. 4) to display the
( and in fi g. 4; see
VOLUME MUTE
3 4 5 6
± Monitor setup under Windows
Under Windows ® NT 4.0 no separate setup file is
required. Select the vertical frequency and the number
of colors directly from within the "Settings"
Panel" "Display" "Settings" menu.
± Disabling the sound (MUTE) ....................................
You can mute or activate sound playback by pressing
the MUTE button ( in fi g. 4) while the OSD menu is
not displayed.
3. Press the OSD button SELECT/AUTO (
to activate the selected function or associated sub-
menu.
4. If you selected a submenu, now select the subfunc-
tion you want using the
and in fi g. 4).
5. Set the desired value using the OSD button
( and in fi g. 4). The new settings will take effect
immediately.
6. Repeat steps 2–5 to make further adjustments as
needed.
7. The OSD menu automatically disappears if no
changes are made for more than 10 seconds (default
setting). The current settings will be saved. You can
close it manually by pressing the MENU button (
in fi g. 4).
® NT 4.0:
"Control
in fi g. 4)
or OSD buttons (
or