Herunterladen Inhalt Inhalt Diese Seite drucken

Troubleshooting; Display Problems; Technical Specifications - BELINEA 10 19 20 Bedienungsanleitung

Tft-monitor
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

ENGLISH

TROUBLESHOOTING

Blank Screen
Power indicator is off
-
Make sure the power cable and the power adapter are connected properly (see section "Connecting").
-
Make sure that the monitor was turned on using the power switch (see section "Startup").
Power indicator lights green
-
A screen saver may have activated automatically after a certain period of inactivity. Press any key on your
keyboard or move the mouse.
"No cable" message
-
Is the signal cable connected to the monitor and the PC's graphics port (see section "Connecting")?
-
Is the PC turned on (see your PC's documentation)?

Display Problems

Image is displaced to the left/right or to the top/bottom
-
If the image appears normal but off-center, you can adjust it using the OSD functions. For further information, see
chapter "Basic Setup", section "Automatic Image Adjustment" or chapter "OSD Menu Functions", section "H Position/
V Position".
Image flickers or is shaky
-
Perhaps setup file chosen for the monitor is incorrect. For information on monitor setup under Windows 9x/ME/
2000/NT/XP consult the "Configuration" section.
Image is blurred
-
Check brightness and contrast settings (see chapter "OSD Menu Functions", section "Brightness/Contrast").
-
Check the image noise and sharpness setting (see "Phase" and "Clock" functions in the "OSD Menu Functions"
section).
Color problems
-
If the colors are off (e.g. white is not really displayed as white etc), you should adjust the color temperature (see
"Color" function in section "OSD Menu Functions").

TECHNICAL SPECIFICATIONS

LCD panel
Contrast ratio
Viewing angle
Response time
Brightness
Input signal
Display colors
Synchronization
Video band width
Ergonomic resolution
Audio
Power connection
Power consumption
Dimensions / weight
Operating environment
14 - Belinea 10 19 20
19 inch diagonal size (48,3cm visible), low radiation according to TCO 03, certified to
ISO 13406-2, pixel fault class II, PVA panel technology
600:1 (typical)
vertical 170°, horizontal 170° (typical)
Rise time: 15 ms (typical), Fall time: 10 ms (typical)
2
250 cd/m
(typical)
Video: analog (D-SUB) and digital (DVI-D)
16.7 mill. colors
30 – 80 kHz horizontal, 56 – 76 Hz vertical
135 MHz (pixel rate)
1280 × 1024 (60 Hz)
Amplifier: 1 W at 8 Ohms / 1 – 15 kHz
Loudspeaker: 1 W continuous load, 1.5 W peak power
Input: 100 – 240 V AC +/- 10 %, 50/60 Hz
ON status: max. 45 W; color of the status LED: green
SLEEP status analog: < 1 W; color of the status LED: green blinking
Power saving functions EPA certified
Width: 418mm, height: 435.5mm, depth: 200mm (net), 6.3 kg (net)
Operation: 0 – +40 °C, humidity: 20 – 80 % (without condensation)
Storage: -20 – +60 °C, humidity: 8 – 95 % (without condensation)

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis