Configuration; Basic Setup; Image Settings Using The Osd Menu - BELINEA 10 30 26 Bedienungsanleitung

ENGLISH

CONFIGURATION

➧ Monitor setup under Windows
XP:
If using the monitor under Windows
we strongly recommend installing the Belinea settings file.
You can get this file from your Belinea dealer or download
it from the MAXDATA FTP server at ftp.maxdata.com.
Here, click the "Belinea_Treiber_Driver" directory and
download the Belinea.inf and README_Belinea.TXT files.
Follow the
README_Belinea.TXT file.

BASIC SETUP

➧ ➧ ➧ ➧ ➧
Shortcut for adjusting contrast and brightness .......................................................................................................
You can adjust the contrast and brightness directly by
pressing the
the OSD menu is not displayed. To adjust the brightness
directly, press the

IMAGE SETTINGS USING THE OSD MENU

The OSD menu appears in a window on your screen. It
allows you to select the image settings you want to
change.
12 - Belinea 10 30 26
Downloaded from www.Manualslib.com
®
9x/ME/2000 and
® 9x/ME/2000 or XP
installation instructions
or buttons ( in fig. 4) while
and
button. To adjust the contrast directly,
Belnea
1 2
1 2
 ƒ „ ‚ … †
Figure 4. Monitor features
manuals search engine
➧ ➧ ➧ ➧ ➧ Monitor setup under Windows
Under Windows ®
Select the vertical frequency and the number of colors
directly from within the "Settings"
"Display" "Settings" menu.
in the
press the button. After the corresponding OSD menu
is displayed, press the
ness or contrast, or press the
button 1 ( in Abb. 4) to close the corresponding menu.
➧ ➧ ➧ ➧ ➧ How to open the OSD menu ....................................
1. Press the button 1 (
menu on the screen.
2. Select the desired function icon using the buttons
and (
section "OSD Menu Icons").
3. Press the button 2 (
function.
4. Enter the desired value by using the buttons
(
and
5. To store the setting, press the button 1 again. Repeat
steps 2-4 to make further adjustments as needed.
6. The OSD menu will automatically disappear if no
changes are made for more than 45 seconds. The
current settings will be saved. You can also close it
manually by pressing the button 1.
®
NT 4.0:
NT 4.0 no separate setup file is required.
"Control Panel"
button to increase the bright-
button to reduce it. Press
in figure 4) to display the OSD
in figure 4, see the following
and
in figure 4) to activate the
).
and