Features; Important Information - BELINEA 10 Benutzerhandbuch

ENGLISH

FEATURES

This monitor is suitable for connection to IBM-compatible systems equipped with a 15-pin VGA connector. An overview
of the numerous functions and features is provided below.
Multiscan The monitor automatically scans all horizontal frequencies between 30 and 70 kHz as well
30 - 70 kHz as all vertical frequencies between 50 and 160 Hz.
50 - 160 Hz
Dot Pitch This Super VGA monitor is equipped with a high resolution CRT with a dot pitch of .26 mm.
0.26 mm
Resolution
The monitor attains maximal resolution of 1280 × 1024 pixels.
1280 × 1024
Digital Front
Digital Front Control with 16 memory settings (10 factory-preset and 6 user-defined modes)
Control
makes the setting of various graphic and color modes easy.
On Screen
This 17 inch monitor is equipped with an OSD (On Screen Display) menu to make professional
Display
adjustments easy.
TCO 99
This monitor exceeds the TCO 99 emission requirements.

IMPORTANT INFORMATION

Note on monitor placement
•
The setup location must not be extremely hot,
cold, humid or dusty. Heat and cold can impair
the functionality of the monitor. Humidity and dust
can cause the monitor to fail.
•
Don't place the monitor near heaters such as
radiators or the like. Don't expose the monitor to
mechanical vibrations or jarring.
•
Position the monitor so that no direct light or sun
strikes the screen, which could cause reflections
that reduce the quality of the image.
•
Equipment that generates magnetic fields, i.e.
laser printers, speakers, etc., must not be placed
close to the monitor. They can distort the image.
Notes on power connection
Only use the power cord designated for use in
your country.
•
After turning off the monitor wait for 30 seconds
before disconnecting the power cord. This time
is needed for the static electricity on the screen
to dissipate.
The wall outlet should be within easy reach.
Pulling the power plug is the only way to
disconnect the monitor from the power source.
12 - Belinea 10 30 26
Safety instructions for operation
The power cord must not be damaged. Do not
place any objects on the power cord and make
sure it does not have any knots. To unplug the
cord, always pull on the plug and not on the cable
itself.
•
Never put anything on top of the monitor,
especially not any container with liquid. If liquid
enters the monitor it may cause electric shock
or short circuit.
•
Avoid covering the ventilation slots. Air
circulation is necessary to prevent the monitor
from overheating. If the air circulation is restricted
it could cause fire or damage the monitor.
•
Do not use any solvents to clean the monitor, as
the housing could be damaged. For more
information about cleaning the monitor, please
see "Caring for your Monitor".
Never open the monitor housing yourself. There
is a danger of electric shock and other hazards.
The monitor may only be opened and serviced
by qualified professionals.