Important Information; Caring For Your Lcd Monitor - BELINEA 10 30 26 Bedienungsanleitung

ENGLISH

IMPORTANT INFORMATION

Note on monitor placement
•
The setup location must not be extremely hot, cold,
humid or dusty. Heat and cold can impair the
functionality of the monitor. Humidity and dust can
cause the monitor to fail.
•
Don't place the monitor near heaters such as
radiators or the like. Don't expose the monitor to
mechanical vibrations or jarring.
•
Position the monitor so that no direct light or sun
strikes the screen, which could cause reflections
that reduce the quality of the image.
Notes on power connection
Only use the power cord designated for use in
your country.
•
After turning off the monitor wait for 30 seconds
before disconnecting the power cord. This time is
needed for the static electricity on the screen to
dissipate.
The wall outlet should be within easy reach. Pulling
the power plug is the only way to disconnect the
monitor from the power source.
• This monitor is ENERGY STAR ® -compatible.
MAXDATA is an ENERGY STAR ® partner and
guarantees that this device complies with the
ENERGY STAR ® guidelines for optimizing power
consumption.

CARING FOR YOUR LCD MONITOR

•
First, unplug the power cord from the wall socket.
•
If the monitor is extremely dirty, clean it with a moist
cloth. Use only warm water and then wipe the monitor
dry. Solvents or harsh cleaners can damage the
housing. Clean the picture tube only with a soft cloth,
otherwise you may damage the picture tube coating.
•
If the monitor is only slightly dirty, clean it using a soft,
dry and antistatic cloth.
10 - Belinea 10 30 26
Downloaded from www.Manualslib.com manuals search engine
Safety instructions for operation
The power cord must not be damaged. Do not
place any objects on the power cord and make
sure it does not have any knots. To unplug the
cord, always pull on the plug and not on the cable
itself.
•
Avoid covering the ventilation slots. Air circulation
is necessary to prevent the monitor from
overheating. If the air circulation is restricted it
could cause fire or damage the monitor.
•
Do not use any solvents to clean the monitor, as
the housing could be damaged. For more
information about cleaning the monitor, please see
"Caring for Your Monitor".
Never open the monitor housing yourself. There
is a danger of electric shock and other hazards.
The monitor may only be opened and serviced by
qualified professionals.
Notes on ergonomics
In order to relieve your eyes, neck and shoulder
muscles when looking at the screen, we
recommend that you maintain a distance of 50 to
75 cm between the monitor and your eyes, and
that you leave at least 10 cm between the
keyboard and the monitor to rest the balls of your
hands. In addition, you can relax your eyes by
regularly focusing on an object at a distance of
about 6 m. To achieve an ergonomic sitting
position, your elbows, pelvis, knees and ankles
should form a right angle.
•
The monitor's cathode ray tube is covered with a
special coating for reduced emissions. This coating
is more susceptible to scratches and marking than
lower performance displays lacking this feature. Do
not touch the screen with pens and pencils. Do not
allow watches, rings, buttons and other clothing
accessories to brush against the screen (a common
cause of scratches are tie pins when moving the
display).