Herunterladen Inhalt Inhalt Diese Seite drucken

Important Information; Caring For Your Monitor - BELINEA 10 80 35 Bedienungsanleitung

Crt-monitor
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

ENGLISH

IMPORTANT INFORMATION

Note on monitor placement
The setup location must not be extremely hot,
cold, humid or dusty. Heat and cold can impair
the functionality of the monitor. Humidity and dust
can cause the monitor to fail.
Don't place the monitor near heaters such as
radiators or the like. Don't expose the monitor to
mechanical vibrations or jarring.
Position the monitor so that no direct light or sun
strikes the screen, which could cause refl ections
that reduce the quality of the image.
Notes on power connection
Only use the power cord designated for use in
your country.
After turning off the monitor wait for 30 seconds
before disconnecting the power cord. This time is
needed for the static electricity on the screen to
dissipate.
The wall outlet should be within easy reach. Pulling
the power plug is the only way to disconnect the
monitor from the power source.
This monitor is ENERGY STAR
MAXDATA is an ENERGY STAR
guarantees that this device complies with the
®
ENERGY STAR
guidelines for optimizing power
consumption.

CARING FOR YOUR MONITOR

First, unplug the power cord from the wall socket.
If the monitor is extremely dirty, clean it with a moist
cloth. Use only warm water and then wipe the
monitor dry. Solvents or harsh cleaners can damage
the housing. Clean the picture tube only with a soft
cloth, otherwise you may damage the picture tube
coating.
If the monitor is only slightly dirty, clean it using a soft,
dry and antistatic cloth.
10 - Belinea 10 80 35
Safety instructions for operation
The power cord must not be damaged. Do not
place any objects on the power cord and make
sure it does not have any knots. To unplug the
cord, always pull on the plug and not on the cable
itself.
Avoid covering the ventilation slots. Air circulation
is necessary to prevent the monitor from
overheating. If the air circulation is restricted it
could cause fi re or damage the monitor.
Do not use any solvents to clean the monitor,
as the housing could be damaged. For more
information about cleaning the monitor, please
see "Caring for Your Monitor".
Never open the monitor housing yourself. There
is a danger of electric shock and other hazards.
The monitor may only be opened and serviced by
qualifi ed professionals.
Notes on ergonomics
To protect your eyes, neck and shoulder muscles
when working with a computer, we recommend
that you maintain a viewing distance of between
®
-compatible.
50 and 75 cm from the monitor. Furthermore, you
®
partner and
should regularly focus on an object around 6 m
away from you to help your eyes relax. Ergono-
mically, your posture is best when elbows, pelvis,
knees and ankles are all at right angles.
The monitor's cathode ray tube is covered with a
special coating for reduced emissions. This coating
is more susceptible to scratches and marking than
lower performance displays lacking this feature. Do
not touch the screen with pens and pencils. Do not
allow watches, rings, buttons and other clothing
accessories to brush against the screen (a common
cause of scratches are tie pins when moving the
display).

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis