Controls And Electrical Connections - Key Automation Spark03 Anleitungen Und Hinweise Zu Installation Und Einsatz

EN

2 - CONTROLS AND ELECTRICAL CONNECTIONS

The spotlight is equipped with an IP65 integrated wiring system, featu-
ring a jack-type male connector for power input (fig. 1a) and a jack-type
female connector for cascade parallel cabling (fig. 1b). These jack connec-
tors are compatibile with the wiring already integrated into some pergola
lighting systems.
The spotlight also comes with an 1,5 m additional cable (fig. 1c), to get
extra reach if needed.
Always observe the power supply polarity indicated in Fig. 2. The luminous
flux is dimmable via PWM.
Fig. 2
+ - + -
In the case of parallel connections (fig. 3), the maximum number of spot-
lights that can be connected is 10, and the cross-section of the backbo-
ne wiring should not be less than 2x0.4 mm² (AWG 21).
Fig. 3
24 Vdc
MAX 10
1 10
6