Safety Warnings - Key Automation Spark03 Anleitungen Und Hinweise Zu Installation Und Einsatz

EN

SAFETY WARNINGS

ORIGINAL INSTRUCTIONS – Important Safety Instructions
Follow all instructions as incorrect installation may result in serious
injuries! Keep these instructions.
Read the instructions carefully before proceeding with the installation.
The design and manufacture of the devices included in this product,
as well as the information contained in this manual, comply with cur-
rent safety standards. However, incorrect installation and program-
ming may result in severe injuries to those performing the work and
to those using the system. For this reason, it is crucial to careful-
ly follow all the instructions provided in this manual during installation.
Do not proceed with the installation if you have any doubts of any kind.
Contact the Key Automation Customer Service for clarification if necessary.
In light of this, the final connection of the automation sy-
stem to the electrical network, the system testing, commissio-
ning, and periodic maintenance must be carried out by qualified
and experienced personnel, in compliance with these instructions.
The safety and functionality of the device and the system are ensu-
red by adhering to European standards and the instructions contai-
ned in this manual. The product installation must be performed exclu-
sively by qualified personnel following the instructions in this manual.
Considering the potential risks that may arise during the instal-
lation and use of the product, it is necessary to install the au-
tomation system while observing the following warnings:
The product must not, under any circumstances, be modified or tampered
with. Any action on the product not explicitly authorized is considered tam-
pering. Any modification will void all safety guarantees and the product's
compliance.
3