Adjusting The Articulation Joints - Waldmann Rllq 63 Gebrauchsanweisung

Instructions For Use Magnifier Luminaire RLLQ 63 (R) „RING LED"
ENG
Operation (continued)
Fig. 24
Fig. 25
Positioning
See Fig. 2 on page 3.
The light head [2.1] is mounted to a
flexible articulated hose [2.2]. This
allows the light head to be rotated
into virtually any desired direction.
CAUTION
Damage to the articulated hose.
Bends or too small a radius can
damage the articulated hose.
¾ Avoid too small a radius or
bending the articulated hose.
Adjusting the
articulation joints
See fig. 2 on page 3.
Depending on the design, the light is
equipped with a different number of
articulation joints (see fig. 25).
The articulation joints, except for
the joint [2.3] directly on the light
head [2.1], can be adjusted.
Each joint must be adjusted so that
the light is - on the one hand - easily
movable and - on the other hand -
remains in the position adjusted
by the user.
! CAUTION
Hazard to man and material
caused when light tilts!
Articulation joints adjusted wrong-
ly may cause the light to tilt!
¾ Adjust each articulation joint
such that the adjustment can-
not change by itself.
23