Operation - Waldmann Rllq 63 Gebrauchsanweisung

Instructions For Use Magnifier Luminaire RLLQ 63 (R) „RING LED"
ENG

Operation

Fig. 21
22
Switching On/Off
See Fig. 2 on page 3.
The light can be switched on and
off via the sensor switch [2.4] on
the light head [2.1].
Switching on
Touch the sensor for a brief mo-
ment -> the light will be switched
on (switch-on value is the last
dim value).
Switching off
Touch the sensor again for a
brief moment -> the light will be
switched off.
Dimming
(RLLQ 63 R only)
See Fig. 2 on page 3.
The light can be switched on and
off or dimmed continuously via
the sensor switch [2.4] on the light
head [2.1].
Dimming
Touch the sensor until the desired
brightness is obtained.
Note: To reverse the dimming
direction, briefly interrupt touching
the sensor.
Overheating protection
Note
T h e l u m i n a i r e i s e q u i p p e d
with overheating protection.
In case the luminaire is switched
off because of a risk of overheating,
the luminaire must first be cooled
down, before being put back into
operation.